Updates from mudslung RSS

• 

  Mudslung 8:17 pm on September 26, 2009 | 2 Permalink | Log in to leave a Comment

  I have a goofy request… Hopefully someone is on now that can help. I have a 3dconnexion Space navigator SE and I am UNABLE to connect to their website to download the driver. I’ve tried every PC in the house and even altered Internet settings. I can get to any site in the world, EXCEPT for 3dconnexion.com? Can someone try to go to that site and post back if you were successful? I’m looking to see if they have a 64bit driver for the Space Navigator SE?
  Thanks very much…

  The connection has timed out

  The server at http://www.3dconnexion.com is taking too long to respond.

  * The site could be temporarily unavailable or too busy. Try again in a few
  moments.

  * If you are unable to load any pages, check your computer’s network
  connection.

  * If your computer or network is protected by a firewall or proxy, make sure
  that Firefox is permitted to access the Web

   

  Reply Click here to cancel reply.

  You must be logged in to post a comment.

• 

  Mudslung 8:13 am on August 24, 2009 | 6 Permalink | Log in to leave a Comment Tags: blendig geometry, blends, surface blending

  Hey All,

  Long time - no see… Can anyone help me with a blending issue? I would like to blend the faces together of the wrist strap extrude into this part? Haven’t explored surface blending enough, I guess.

  Thanks
  
  Attachment - 2009_8_24_11_13

   
• 

  Mudslung 5:19 am on July 30, 2009 | 4 Permalink | Log in to leave a Comment Tags: Tag it (45)

  I am now experiencing “Ghosting” as I move my mouse over a part segments of the part ghost out? Also edges, faces, and vertices no longer highlight when I cursor over them.
  I am running a nVidia GeForce 8600 GT 512MB. Also I was using RivaTuner to Slightly overclock the GPU. Are these indications of a GPU going bad or do I need to check some internal settings? Has anyone else experienced these issues?
  Thanks

   
• 

  Mudslung 3:39 am on July 19, 2009 | 0 Permalink | Log in to leave a Comment Tags: Tag it (45)

  Nice..Thats what I’m talking about. Every once-in-a-while I like to try different ways of doing things and I sure appreciate your input. I really liked the “lead-Out” idea with revolving a sketch line.
  Thanks CBL…
  P.S. I swear I hit REPLY…
  

   
• 

  Mudslung 7:23 am on July 18, 2009 | 5 Permalink | Log in to leave a Comment Tags: Tag it (45)

  Because of the thickness of my part (I am assuming) I am unable to perform a “Variable Pitch” helix to create a clean entry and exit of my thread. Is there a method for cleaning up these end conditions without using the variable pitch option? The “error” I receive is “zero thickness geometry” when I try the variable pitch on this particular helix.
  Thanks for any help…
  
  Attachment - 2009_7_18_10_22

   
• 

  Mudslung 8:17 am on July 9, 2009 | 4 Permalink | Log in to leave a Comment Tags: filter, multibody (2), thin feature

  Ok, I give up. I am trying to make a Screen inside the frame of this filter part. If you open the part you will see my attempts if you roll to the end.
  Any help would be greatly appreciated.
  
  Attachment - 2009_7_9_11_17

   
• 

  Mudslung 5:51 am on July 7, 2009 | 0 Permalink | Log in to leave a Comment

  What happened to the ability to edit responses? In referance to my response to Berko;
  If you follow the link I provided, you will not be able to view the complete article, you will be asked to “Subscribe”. If you goto google search and type in: When A GeForce Isn’t A GeForce
  The first link is the article and if you goto it from there you will get the WHOLE article! Goofy, I know.

   
• 

  Mudslung 7:15 am on June 29, 2009 | 4 Permalink | Log in to leave a Comment Tags: Tag it (45)

  Speaking of “Springs…” I would like to create a mate with this Sub-Assembly that will allow the spring to be compressed in future animation?
  Also does anyone know how to create tight spiral turns at the start and end’s of a helix?
  Thanks
  
  Attachment - 2009_6_29_10_14

   
• 

  Mudslung 2:51 pm on June 25, 2009 | 9 Permalink | Log in to leave a Comment Tags: Tag it (45)

  Ok BEN, here I am again…
  I tryed replicating the Diamond cut you made for my last part. I understand the concept, just can’t seem to complete the operation.
  Sure appreciate any help?
  Thank you.
  
  Attachment - 2009_6_25_17_50

   
• 

  Mudslung 9:04 am on June 21, 2009 | 9 Permalink | Log in to leave a Comment Tags: Diamond pattern Cut

  I would like to apply a cut diamond groove pattern around the outside ring of this retaining ring part? Is there a feauture/method for making the grip pattern?

  Thanks for any help.
  
  Attachment - 2009_6_21_12_4
  After uploading this part, I LOST my Revolve-Cut for the inside threads?

   
• 

  Mudslung 10:06 am on June 17, 2009 | 10 Permalink | Log in to leave a Comment

  Renamed file from RAR to ZIP
  Attachment - spray-nozzle
  If you open the part file in HLV you will see the holes that I am trying to connect?

   
• 

  Mudslung 9:50 am on June 17, 2009 | 2 Permalink | Log in to leave a Comment Tags: Spray Nozzle

  
  
   
• 

  Mudslung 12:16 pm on February 8, 2009 | 2 Permalink | Log in to leave a Comment

  Recently, I reformatted my system and forgot to save my favorites list. Now I can’t seem to remember a particular SW CAD site I would really like to get back to. Think it was something like CADDIT.com but that goes nowhere. Would appreciate any referances that you can supply.

  Thanks

  CADDIT.NET    No that wasn’t it.

   
• 

  Mudslung 10:18 pm on December 6, 2008 | 6 Permalink | Log in to leave a Comment Tags: Addin (13), render (2)

  Does anyone know of a “High Level” Add-in Render engine for swx 2009?
  Right now I export to Rhino and use Vray.